Lollar Strat HSS Pre-Wired Kit

Description

Made In : USA

Condition : BRAND NEW

Description :

Lollar HSS Pre-Wired Kit For Stratocaster Model

Product Details

Customers regularly ask for our recommendation when wiring their HSS Strats, and we’ve found this component selection and circuit to be the best fit to our ears. We use 500k volume and tone pots for the humbucker, along with a 5-way Super Switch for coil-splitting in position 2 (middle/bridge). We also use two 470k resistors with the single-coils so that each pickup sees a 250k volume and tone pot for ideal balance.

Includes:
(1) Wiring Diagram, Download HERE
(2) CTS 500k Split Shaft Potentiometers w/.375″ (3/8″) Shaft Length
(1) CTS 250k Split Shaft Potentiometer w/.375″ (3/8″) Shaft Length (1) 5-Way Super Switch
(2) 470k Resistors
(1) Switchcraft 1/4″ Mono Output Jack
(2) Orange Drop .022UF Capacitor

Control Layout:

• Master Volume (500k)
• Neck & Middle Tone (250k)
• Bridge Tone (500k)
• 5-Way Super Switch
• Position 2 Coil-Split

Choosing Your Capacitor Value
We offer the option of three different capacitor values so you can choose how much top end you want rolled off with the tone pot(s):

• .015µF rolls off the least amount of top end.
• .022µF is the median value.
• .047µF rolls off the most top end when your tone pot is turned down.

To help you choose the capacitor that best fits your needs, be sure to watch our videos on Capacitor Values and Capacitor Materials.

More About Our Pre-Wired Kits
Our kits are hand-wired by Lollar Pickups in the USA to Jason Lollar’s preferred specifications. They feature Lollar spec’d CTS potentiometers with a special taper for an even range of volume and tone adjustment. With high-quality switches for superior reliability and longevity, and your choice of Orange Drop Poly Film-in-Foil or Bumblebee Paper-in-Oil capacitors wired with 22 AWG vintage push-back wire for that vintage look and sound.

We’ve also put together a video on Soldering Basics that may be helpful to watch before installing your pre-wired kit.

*THESE KITS ARE BUILT WITH THE CONTROLS SPACED TO FIT STANDARD USA FENDER-STYLE TELECASTERS. CONTROLS ON IMPORT GUITARS MAY BE SPACED DIFFERENTLY.
If you are installing the kit on an import guitar with metric-sized pots, you may need to ream the holes for your controls (AVOID USING A DRILL BIT) to accept the slightly larger US-spec pots and purchase US-spec knobs.